ChungMedia

Using Zacuto’s EVF as part of my Documentary Rig

By Duy Linh Tu

Duy Linh Tu's documentary HDSLR rig on a Manfrotto 503 head and legs

I am currently shooting Close to Home, a feature-length documentary about HIV in the southern United States (www.closetohomefilm.com).  As a part of the production process, we’ve been posting some behind-the-scenes stills online, and Dan Chung noticed that I was using the Zacuto EVF.  

So, here’s how the device works as a part of my overall documentary rig. There are countless websites already dedicated to HDSLR rigs, but hopefully this post will give shooters specific information about how one might approach using HDSLRs for documentary or other non-fiction work.  My set up is by no means the ‘right’ way of doing things; it is just one way that has worked for me.

Sam Guzik models Duy Linh Tu's documentary DSLR rig.

For Close to Home, I needed a camera set-up that was both small and reliable.  I am shooting this documentary in rural Mississippi, Louisiana, and Alabama, where the subject matter – homosexuality and HIV/AIDS – remains extremely taboo.  Our characters are, wisely, concerned about the presence of cameras; they don’t want to draw too much attention to themselves.  We are working on a tight production schedule, so I don’t have much time to shoot.  Additionally, we’re filming specific events that, in most cases, will only happen once.

I shoot on a 5DmkII, which I believe is the HDSLR with the best image for my needs.  Equally importantly, it has manual audio control that allows me to record sound directly into the camera.  I use a combination of a Sound Devices MixPre, a Marantz PMD-620, and a Sescom attenuator cable to send audio directly into the camera (the audio gain is set to 1 in the 5D mark II).  I do record audio separately as a back up, but I prefer to avoid syncing as a part of my workflow.  I have used both the Zoom H4n and the Tascam DR-100 in the past, but I find my set-up provides the quietest preamps and the best ergonomics for adjusting audio in the field (real knobs to turn!)

My primary lens is the Canon 24-105mm f4L IS.  Because the 5D Mark 2 is full-frame, I would not stand a chance of keeping any kind of focus shooting wider than f4.  For this film, I am shooting run and-gun and there are very few controlled or set-up shots that would allow me to go as wide as f2.8 or f1.4.  Additionally, the IS on this lens is extremely effective for reducing shake.

For focusing, I use the Ikan ELE-FGK follow focus kit.  Prior to this project, I was against using a follow focus.  I thought these devices were meant more for commercial or feature work.  But, after shooting many long days with this unit, I cannot imagine focusing with my hand on the lens again.  

With a follow focus, rack focusing is smooth.  There is also less strain on my wrist because the focus wheel is positioned to the side of the camera.  The Ikan follow focus is a solid piece of gear.  I’ve used more expensive follow focus units, but they were not any smoother or more sturdy than the Ikan.

Getting good shots is my primary job, so I need the right monitoring solution. I have tried every set-up: using the LCD on the camera only; using a Zacuto Z-Finder on the LCD, and using a SmallHD DP6 external monitor. That has all changed with the Zacuto EVF Flip, combined with the Zacuto Z-Finder.

Side view of Zacuto-EVF in action.

The Zacuto EVF has many great features such as false color, zebras, focus assist (peaking), blue only, and many more.  But, in the field, I use none of these.  In fact, some features like zebras and focus assist actually made it harder for me to focus in a run-and-gun situation.  

The Zacuto EVF does, however, have four main features that are critical to me getting the shots right.

1.  Scaling.  As most 5DmkII shooters know, the HDMI output drops down to 480p.  The EVF scales this image up and fills the screen.  Paired with the Z-Finder, I get a huge, crisp image to look at.

2.  Framing lines.  The EVF has lines for both 1.78:1 and 2.35:1 (and others), the two aspect ratios I most often shoot in.  This feature helps me make sure I compose the shot in a way that avoids accidentally cropping out part of the intended image.  Occasionally, I composed incorrectly when shooting with just the LCD.

3.  Sun block.  The Z-Finder blocks out all extraneous light, so monitoring in bright sunlight is easy. When I used the SmallHD DP6, I was forced to use the enclosed sunshade, making my rig much bigger and more intimidating than I wanted it to be.

4.  Point-of-contact.  Putting my eye right to the EVF provides me with yet another point-of-contact, unlike using an external monitor.  So, with my monopod/shoulder strap support, my left hand on the follow focus, and my right hand on the camera, I have four points-of-contact on the camera.  My shots are now so steady that we do not use a tripod for most of our interviews in the film.

One bonus feature of using an EVF for documentary shooting is that, while looking into the viewfinder, I disappeared into the camera.  I was not distracted by outside elements; I was only looking at what was on the screen.  Additionally, the characters in my shots learned to ignore me when my head was in the EVF. When I used an external monitor like the DP6, I was still making too much of a connection with my subjects to have them forget about me.

Duy Linh Tu's documentary rig with the SmallHD DP6 (and sunshade). While a terrific monitor, the DP6 makes the rig much bigger and more intimidating.

It has taken me almost two years of experimentation to get my documentary rig to the point where I feel completely comfortable and secure about it.  I get pristine audio with this set-up.  And, just as importantly, I get the steady, well-exposed, and properly composed shot that I want.  

I hope that this has been helpful.  Again, this is by no means the only way to set up a camera; the flexibility of the HDSLRs makes it a truly powerful format.  Below is a list of all the parts in my documentary rig.  If you have any questions, I’m @duylinhtu on Twitter.  Good luck.

Camera: Canon 5DmkII

Lenses: Canon 24-105mm F4L IS, Canon 70-200mm F4L IS, Canon 100mm F2.8L Macro IS

Monitor: Zacuto EVF Flip w/ Zacuto Z-Finder 2.5X and HDMI cable, Zacuto Zicro Mount, Mini Ikan 4” rod

ND Solution: Lee Filter Foundation Kit, Tiffen 4 x 4 ND filters (.3, .6, and 1.2)

Audio: Sennheisser ME-66 shotgun mic w/ Rycote cover, Pearstone shockmount, and XLR cable Sound Devices MixPre w/ custom-built bracket, Marantz PMD620 audio recorder w/ Sescom attenuator cable, and XLR cable

Hardware: Express35 tripod plate, Redrock Micro 9” rods (2), Redrock Micro Handlebar Camp with four-inch bar, Redrock Micro DSLR baseplate, Redrock Micro Micromount (2), Ikan ELE-FGK follow focus

Duy Linh Tu is Assistant Professor and Director of Digital Media at the Graduate School of Journalism, Columbia University.

Monitor X - The Affordable Viewfinder

Posted on September 11th, 2011 by Duy Linh Tu | Category: Canon Eos5DmkII, EVF | Permalink | Comments (3)

Zacuto launch EVF Gorilla plate bracket for DSLRs

The new Zacuto EVF Gorilla plate system

I’ve been using the Zacuto EVF for a while now and find it to be a very welcome addition to my regular shooting kit with the Canon 5DmkII. Originally I had it mounted on top of the camera with the supplied hotshoe adapter but very quickly found this to be an inconvienient location because there was then nowhere to place my microphones when running and gunning. I have since constructed a bracket using some parts from Really Right Stuff and an Ultralight arm that allowed me to place the EVF on the side of the 5DmkII. This frees up the hotshoe again and places the EVF in a good position on the side of the camera to allow for a more ENG style of shooting – better balanced with the camera offset when mounted on a chest or shoulder support rig. Crucially for me this setup allows me to keep the EVF as part of the camera as I move from Redrockmicro running man rig chest rig, to full shoulder rig, to tripod and to my camera bag – all without needing to dissassemble the EVF setup. My solution is fine but a bit expensive, somewhat of a cludge and a little heavy.

Enter Zacuto with their own custom solution which looks to be lighter and more flexible than my setup. The EVF mount is based on the company’s Gorilla plate system for DSLRs. It too offsets the EVF to the optimal position without adding too much bulk to the camera. There is also a quick release to allow rapid detachment of the EVF.

The Zacuto EVF Gorilla plate in use with a Striker rig

For me I could see myself using this setup almost without a support rig at all for some shoots, just holding the EVF to my face and gripping the camera in the other hand. Also launching soon is the Zacuto’s universal cable Pincher which will neatly hold HDMI cables in place and provide strain relief.

The EVF Gorilla plate bracket

The EVF Gorilla plate bracket is $240 US and available now from Zacuto’s web store, it requires the use of a $69 Gorilla plate if you do not own one already.

Disclosure – This website recently joined the Zacuto affliate sales program but this in no way affects this website’s many and diverse bloggers who are free to talk about any gear they use.

Posted on August 4th, 2011 by Dan Chung | Category: Camera support systems, Canon Eos5DmkII, DSLR video news, EVF | Permalink | Comments (0)

Dan Chung HDDSLR masterclass on June 8th at Jacobs Pro Lounge in London

I’m back in London this month for a workshop at the Jacobs Pro lounge, helping photographers and videographers improve the way they shoot real world events. There are only eight places available as we want to be sure everyone gets some hands on tuition – so please book quickly if you want to come.

The Jacobs Pro Lounge

I’ll cover both the technical side and the journalistic one. I’ll go over the basic kit I use day to day including the use of ND filters, audio adapters, support rigs, led lights, sliders, LCD magnifiers and EVFs (I’ll have the new Zacuto EVF with me for people to try). I’ll also discuss my approach to shooting, illustrated by examples of my work, with plenty of tips learned from experience on assignment. There will be sections on slow mo and time-lapse too.
 
Participants should bring their own equipment if possible but there will be a limited amount of demo kit on show too.

The Masterclass will be very personal small group


 
The workshop will be £150 for the day ( 10am-5.30pm ) and will take place on Wednesday 8th June in the Jacobs Pro lounge, 74 New Oxford Street, London WC1A 1EU.
 
To book a place please contact Henrietta or Donal on 0207 436 6996.


 

Posted on May 30th, 2011 by Dan Chung | Category: Canon 550D / T2i, Canon EOS-1D Mk IV, Canon Eos500D/EosT1i, Canon Eos5DmkII, Canon Eos60D, Canon Eos7D, DSLR video news, EVF, Journalism | Permalink | Comments (1)

NAB 2011 – Interesting gear we didn’t have time to check out part 2: Best of the Rest

So this is my last post from NAB 2011 – only 2 days late. I had a great time seeing old friends, meeting new ones and of course checking out all the new toys. I’d like to thank the dslrnewsshooter crew members Seppe Van Grieken and Johnnie Behiri for their tireless work during the show. Their contribution really made our coverage much better this year.

As a parting shot here are a few more bits of gear that we would have featured in detail if only we had the time:

Bruce Dorn with his iDC Zero rig

Canon Explorer of Light Bruce Dorn was at NAB showing his unique iDC system Zero rigs. These are an update of his earlier designs and use a friction based follow focus on a custom bracket to keep the rig ultra compact. The rig for the Canon 60D looked especially nice. Bruce says there is a version for the Panasonic GH2 in the works.

Seppe tries out the Zacuto Scorpion

Zacuto was showing off their prototype Scorpion rig. It has an interesting integrated shoulder support/carry handle and is articulated in a way to make balance easy. With the Zacuto Z-EVF fitted it was nice to use.

The Manfrotto 509HD head

The Manfrotto 502HD head

Manfrotto had a whole range of new gear. Most important to many news shooters will be their new video heads. The 509HD is a model up from the popular 504HD and features the same bridging technology (whatever that means). There is also a new lower end model called the 502HD which is essentially a replacement for the ever popular 501 head.

Art object? small mine? no it's the Manfrotto Dado

Manfrotto also showed Dado – an innovative spherical universal junction that connects to threaded accessories or rods. Looks like a piece of 1970’s art but it very cool. They also have a new snake arm which is a more flexible alternative to the magic arm.

The $299 ipad teleprompter from LCD4video

There were a lot of Ipad based teleprompter systems at NAB this year. This one is probably the cheapest and I’m thinking of getting one for myself. It’s only $299 from LCD4video.

Garrett Brown uses the GoPro 3D on a Steadicam Merlin

GoPro were at NAB again this year showing their just launched 3D system for the diminutive action cams. As I was walking past their booth I spotted none other than legendary Steadicam inventor Garrett Brown trying it out on a Merlin stabilizer.

A Mio 3D rig

Another 3D solution came from Mio 3D. Instead of using two cameras their rig has 3, allowing them to shoot with two interocular distances at the same time. Make sense? if not don’t ask me – check out their website.

Fastec 720p high speed camera

Fastec were a company getting a lot of press coverage for their new hand holdable TS3 high speed camera. Capable of 720 frames per second in HD. Wow! Now if only it were the same price as my DSLR.

The Denz EVF bracket

Rig company Denz had an interesting solution for mounting an EVF to cameras like the Panasonic AF100. I’m going to need to work out some arrangement for my own EVFs so this is definitely an option.

DSLR on wheels

The Radcam has got to be one of the coolest DSLR gadgets I saw at NAB. I’d love to see shots from one of these.

How the Brits shoot video when out for the evening

And to finish our NAB 2011 coverage is this DSLR helmet cam. Recognise the celebrity anyone?

Monitor X - The Affordable Viewfinder

Posted on April 17th, 2011 by Dan Chung | Category: Camera support systems, Canon Eos5DmkII, Canon Eos7D, DSLR video news, EVF, Tripods and monopods | Permalink | Comments (0)

NAB 2011 – LCDEVF prototype shown

Tõnis Liivamägi creator of the LCDEVF talks us though the features of his prototype EVF. It was not a working model at NAB but Tõnis seemed confident that production would start soon. The unique feature of his EVF is that it can mount from the side of the EVF to a simple arm from the camera, although I’m not sure how practical the arrangement would be on a DSLR.

Monitor X - The Affordable Viewfinder

Posted on April 16th, 2011 by Dan Chung | Category: EVF | Permalink | Comments (0)

NAB 2011 – Cineroid show new enhanced and Metal EVFs with new remote control function

Joseph Jang of Korean firm Cineroid demonstrates the latest upgraded version of his company’s Electronic Viewfinder (EVF) and as well as a range of new Metal versions with enhanced construction and options for HD-SDI input and output. The company were the first to sell a HDMI EVF for DSLR use earlier this year and these models are an upgrade on the original.

The Cineroid EVF remote control

Most interestingly he also showed a small remote control accessory which straps onto a rig and allows the user to adjust the EVF’s settings like the magnify function.

Video by Johnnie Behiri and Seppe Van Grieken.

Monitor X - The Affordable Viewfinder

Posted on April 16th, 2011 by Dan Chung | Category: DSLR video news, EVF | Permalink | Comments (0)

Website by Kevin Woo Designs